{"product_id":"cylinder-head-top-end-cover-for-ktm-exc-husqvarna-te-gas-gas-ec-250-2024-2025","title":"Cylinder Head Top End Cover For KTM EXC Husqvarna TE GAS GAS EC 250 2024-2025","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eFeatures an improved combustion chamber design that gives more performance throughout the rev range as well as reduced risk of detonation. It has been designed and tested to work with 91+ octane fuel. The head comes with a complete head gasket kit. \u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompared to stock head insert: The Original compression before installation is approximately 170 PSI, after installation is approximately 183 PSI (as picture shown), Squish clearance is 1.2 mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade of 7075 aluminum that withstand the high pressures and temperatures, so it won't break under pressure.\u003c\/li\u003e\n\u003cli\u003eConsistent power gains throughout the rev range especially in the bottom\/mid:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImproved fuel economy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGreatly reduced risk of detonation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImproved engine life\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSmoother power delivery\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not require race gas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eItem Specifications:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: NICECNC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCondition: 100% Brand new\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: 7075 Aluminum\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eProcessing: CNC-machined\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCap Finish: Anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer\/Liability Statement:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese products are intended for closed-course competition use only.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIt is the owner's responsibility to ensure that jetting\/fueling is appropriate for local weather and conditions to avoid engine damage.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWe are not responsible for any damage, injury or loss resulting from the use of these products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003cbr\u003e1X Cylinder Head Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003eFor KTM 250 EXC 2024-2025 \u003cbr\u003eFor Husqvarna TE250 2024-2025\u003cbr\u003eFor GAS GAS EC250     2024-2025\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1. Drain coolant and remove stock head.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2. Set the deck height using different base gaskets as needed. Deck height is the distance between the top of the cylinder and the top of the outer edge of the piston at the top stop (TDC).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3. Install the new head o-ring on the top of the cylinder and make sure the locating pin is in place and seated properly.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4. Place the supplied 23 x 2.5mm o-ring into the groove on the top of the combustion chamber insert. Place the outer \"cap\" portion of the head over the insert, being careful not to move the o-ring. Screw the spark plug into the top of the insert with your fingers. Holding the spark plug, lift the head assembly as a unit onto the cylinder. Carefully position the head, making sure the locating pins are aligned and the o-ring stays in place.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5. Tighten the nuts\/bolts in a criss-cross pattern to the required torque specification in the owner's manual. Reinstall the head onto the chassis mounting bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTest Data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTest Vehicle: 2024 KTM 250 EXC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating time: 1 Hour\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaw Compression: Approx. 170 PSI\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompression with NICECNC Part: Approx. 183 PSI\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompression test data may vary from vehicle to vehicle at different operating times.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDisclaimer: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNicecnc parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including KTM, Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-250-cylinder-head-cover_4.jpg?v=1733728685\" alt=\"\" width=\"100% style=\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-250-cylinder-head-cover_7.jpg?v=1733728685\" alt=\"\" width=\"100% style=\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-250-cylinder-head-cover_5.jpg?v=1733728685\" alt=\"\" width=\"100% style=\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-250-cylinder-head-cover_6.jpg?v=1733728686\" alt=\"\" width=\"100% style=\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/3689\/5206\/files\/ktm-exc-250-cylinder-head-cover_9.jpg?v=1733728677\" alt=\"\" width=\"100% style=\"\u003e\u003c\/p\u003e","brand":"Nicecnc","offers":[{"title":"Default Title","offer_id":47688698101812,"sku":"1241203901","price":191.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0757\/7252\/6644\/files\/ktm-exc-250-cylinder-head-cover_1_dc5c9412-d6df-47b7-be30-cfe7ae221c52.jpg?v=1776328933","url":"https:\/\/ca.nicecnc.com\/products\/cylinder-head-top-end-cover-for-ktm-exc-husqvarna-te-gas-gas-ec-250-2024-2025","provider":"NICECNC-CA","version":"1.0","type":"link"}