2-Position Rear Lift Kit 1-3/4 in or 2 in for Harley Dyna 2006-2017

Harley Dyna 2006–2017 2-Position Rear Lift Kit

Raise the rear of your Dyna without replacing your existing compatible shocks. This bolt-on lift kit provides two fixed rear-lift positions for a taller, more aggressive stance.

• Performance: Approx. 1-3/4 in Rear Lift at the Axle
• Aggressive: Approx. 2 in Rear Lift at the Axle

Features

• Two Rear-Lift Positions
  Choose between approximately 1-3/4 in or 2 in of rear lift at the axle with the same kit.
• Raise the Rear, Keep Your Shocks
  Relocates the lower rear shock mounting points while retaining your existing compatible twin shocks.
• More Clearance, Taller Stance
  Raising the rear may increase available ground and cornering clearance while giving your Dyna a taller, more performance-oriented profile. Actual clearance varies by motorcycle and setup.
• CNC-Machined 6061 Aluminum
  CNC-machined 6061 aluminum lift blocks with a black anodized finish for precise fitment and a clean appearance.
• Bolt-On Installation
  Installs at the factory lower rear shock mounting area with no drilling or permanent frame modification required.

Tested on Our 2014 Dyna Fat Bob FXDF

Tested with the original 12 in rear shocks, unloaded and held upright on level ground.

Fender Strut Cover Height

• Stock Baseline: 22.4 in (57.0 cm)
• Performance: 23.8 in (60.5 cm)
• Aggressive: 24.0 in (61.0 cm)

These are fixed-point measurements from our test bike and are separate from the 1-3/4 in and 2 in Rear Lift at the Axle specifications. Actual results vary by motorcycle and setup.

Specificationslow

• Brand: NICECNC
• Type: 2-Position Rear Lift Kit
• Material: 6061 Aluminum
• Hardware: Steel
• Finish: Black Anodized
• Process: CNC Machined
• Performance Position: Approx. 1-3/4 in Rear Lift at the Axle
• Aggressive Position: Approx. 2 in Rear Lift at the Axle
• Installation: Bolt-On
• Drilling Required: No

Important Notes

• Both sides must use the same lift position.
• Rear-lift values are approximate specifications measured at the axle. Actual static height varies depending on model, shock setup, load, tires and suspension sag.
• This kit changes the rear mounting geometry but does not increase shock travel or upgrade spring rate or damping.
• Please confirm your model, year and lower rear shock mounting configuration before ordering.
• Aftermarket shocks, exhaust systems or other rear-end modifications may affect fitment and clearance.

Package Includes

1 Pair of Rear Lift Blocks
1 Set of Mounting Hardware

Fitment

Fits select 2006–2017 Harley-Davidson Dyna models:

Street Bob: FXDB / FXDBI / FXDBP
Super Glide: FXD / FXDI / FXDC / FXDCI
Low Rider: FXDL / FXDLI / FXDLS
Fat Bob: FXDF / FXDFSE / FXDFSE2
Wide Glide: FXDWG / FXDWGI
Switchback: FLD
CVO Dyna: FXDSE / FXDSE2 / FXDFSE / FXDFSE2

Disclaimer

Nicecnc parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including KTM, Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, etc.